Discover the superior quality and performance of the Warex AR -00712 DKZ 110
The AR -00712 DKZ 110
Key Features of AR -00712 DKZ 110
At Impexron GMBH , we offer the AR -00712 DKZ 110
Why Choose Impexron GMBH ?
Get Your Quote Today! Ready to enhance your operations with the AR -00712 DKZ 110
Important Notice: While we supply Warex products, Impexron GMBH is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
| BRAND | Warex |
| Product | AR -00712 DKZ 110 <APS> DN 150 |
| Description | Valve |
| Internal code | IMP5019925 |
| Custom code | 84818085 |
| Technical specification | butterfly valve Construction length 56 mm for clamping between flanges in accordance with EN 1092, PN 10 Silumin housing 1.4408 stainless steel flap disc - with increased gap size - 1.4057 or higher grade stainless steel shafts Shaft sealing with O-rings Wave bearing Grey silicone sealing collar replaceable in the housing Can be pneumatically clamped against the flap disc < APS > The valve is equipped with the following special equipment: with built-in shaft extension, steel, height 150 mm, for heat dissipation + Isoplan 750 flat seal; 2 mm thick Design according to drawing: 1024994Mb further attachments: pneumatic rotary actuator AT 60 DR double-acting required control pressure 6.0 bar El. /pneum. APS flap control Type: DKZ110/103 < APS > *** SPS required *** (Attention! Solenoid valves must be equipped with 2 separate Signals are controlled by a PLC! ) for opening and closing shut-off valves of Series: DKZ 110/103 < APS > consisting of: 1 piece mounting plate for Namur valve 1 piece MS ball valve, 1/4" internal thread with hand lever 1 piece pressure reducer, Fabr. Knocks 0.1-3 bar, type.RE01G incl. pressure gauge (1006270) incl. mounting plate and screws Implementation in accordance with Tax Plan No. 0004324 - Ventilation of the sealing collar from the vacuum system available on site - Piping the line from the valve to the sealing collar in VA (screwed connections tested for tightness) - including testing the seal for pressure loss 5/2-way solenoid valve function Norgren 2623077.3036 24 V DC, 1.6 W, IP 65, Namur version - without plug - 5/2-way solenoid valve function Norgren 2623077.3036 24 V DC, 1.6 W, IP 65, Namur version - without plug - Limit switch box with double sensor P+F NBN3-F25F-E8-V1 3-wire version, PNP closer, 10-30 V DC built into a VESTAMID/PRB round housing Diameter 80 x 50 with V1 device plug M12x1 4-pin, ---- without angle socket --- remark =========== With the sealing collar provided, we can for a Function of the fitting and for the sealing collar Do not assume any warranty yourself. In order to comply with delivery times, we must a suitable number of sealing collars available be asked. for medium: bulk material/ air Property: free-flowing, chemically neutral, not tending to bake Working pressure: 1 mbar absolute max. allowable Operating overpressure: < 0.5 bar (Ps) MAWP (Note: MAWP = Ausl. -Pressure) Operating temperature: 0 °C... + 210 °C (Ts) MAWT Surround. -Temperature: 0 °C... + 50 °C (Ta) Explosion protection: no requirement evaluation of butterfly valves in accordance with DGRL 2014/68/EU, Diagram 7, certified module A2. The valves are not subject to conformity assessment. Test pressure: design pressure x 1.1 bar for tightness |